Search results for: code userdefined

Pages: [1]
1
Newbies / Re: Multiple Tags in the FileName
« by StarGeek on June 15, 2017, 01:16:29 AM »

......  slashes, colons, question marks, etc).  Quote  Code: [Select] %Image::ExifTool::UserDefined:: ............  Final (afaik). You would want Final to be  Code: [Select] [code]%Image::ExifTool::UserDefined:: ............  designate as the separator.   Example output: Code: [Select] C:\>exiftool -myshortcut X:\!temp\Test3. ......
2
Newbies / Re: Write to custom XMP field
« by Phil Harvey on January 26, 2017, 01:53:49 PM »

......  that you have named your table "Image::ExifTool::UserDefined::ShopbopCustomData" but referred to a table of a  ............  name:  Code: [Select]  TagTable => 'Image:: ............ ::UserDefined::custom', -  ......

......  does what I want. Thank you very much Hayo!   Code: [Select] iMac-van-Fulco:~ Fulco$ exiftool - ............  : +52.3565640000, +4.9599410000   Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
4
The "exiftool" Application / custom IPTC field as list
« by raulc on September 13, 2017, 12:54:37 PM »

......  file that defines some custom iptc fields.  Code: [Select] %Image::ExifTool::UserDefined = (  ' ......

......  tag definition in a config file, an integer code number is returned for the composite tag, instead  ............  the words. The code returned for ID3v1 Genres in an MP3 file agree  ............  file be changed so that the Genre fields are decoded into words, when used as part of a composite tag? ............   Code: [Select] C:\WINDOWS\system32>exiftool -ver 10.49  ............  read "W:\Test.Exiftool_config" contains this code:  %Image::ExifTool::UserDefined = (  'Image:: ......
6
Newbies / Re: Remove duplicate Keyword
« by StarGeek on July 10, 2017, 01:37:37 PM »

...... ? Because if there's another %Image::ExifTool::UserDefined section, it may not work.  Here's my  ............  tag code that made some time back, though I don't think I  ............ ' => { line in the example .exiftool_config. Code: [Select]  UniqueKeywords => {  Require => ' ............  : undef);  },   }, I notice that your code trims leading spaces. Are you sure you have  ......
7
Metadata / Re: Custom Property Not showing in Adobe Properties
« by Phil Harvey on March 10, 2017, 12:34:08 PM »

......  problems like this.  Here is the problem:  Code: [Select] > exiftool tmp/acrobat.pdf -G1 -a -fgid  ............ . Use the following config file to write both:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
8
Newbies / Re: Defining tags not already in a group
« by remarkableearth on November 17, 2017, 12:27:24 PM »

......  I took from you, edited for my variable names:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ............ => {  TagTable => 'Image::ExifTool::UserDefined::testnamespace',  # (see the  ............  },  },  }, );  %Image::ExifTool::UserDefined::testnamespace = (  GROUPS => { 0 => ' ......
9
Metadata / swapping around IPTC metadata in JPEG files
« by povette on June 12, 2017, 12:24:17 AM »

......  in the ".ExifTool_config" in my Home directory:  Code: [Select] %Image::ExifTool::UserDefined = (  #  ......
10
Newbies / Creating stereoscopic images for Google Cardboard
« by YPOC on May 19, 2017, 08:25:33 PM »

......  the Google Cardboard Camera app. These images encode the right panoramic view into the left panoramic  ............  page. So far I've been able to extract the encoded Image, that is stored as binary base64-encoded  ............  Camera app.  My config file looks like this: Code: [Select] %Image::ExifTool::UserDefined::GImage =  ............ )  Mime => { }, );  # The %Image::ExifTool::UserDefined hash defines new tags to be added # to existing  ............ . %Image::ExifTool::UserDefined = (  # new XMP namespaces (ie. XXX) must be  ............ => {  TagTable => 'Image::ExifTool::UserDefined::GImage',  },  },  }, );   1; ............  #end To extract the encoded image from the left perspective I used .\ ............  so two lines in total. Then I run certutil.exe -decode .\MyImage_right.jpg.bin .\MyImage_right.jpg to  ............  able to pipe ExifTool's output into any base64-decoder)  Now I would like to create these stereoscopic  ......
11
Newbies / Re: Geotagging, GPSPitch, GPSRoll
« by Hayo Baan on July 07, 2016, 06:00:26 AM »

......  not use. Only the following should be necessary:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
12
The "exiftool" Application / Re: UserComment ASCII issue
« by Phil Harvey on April 21, 2017, 11:45:10 AM »

...... , but you will need to modify the config file:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
13
Newbies / Re: Write to unknown tags in Sony MakerNote and SR2SubIFD
« by Phil Harvey on May 12, 2015, 02:28:34 PM »

......  one that should be OK.)  Try this config file:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
14
The "exiftool" Application / get LensType inside my composite tag as a string
« by ajiekc905 on December 12, 2016, 09:03:19 AM »

......  F4.0-5.6 Mega OIS" Instead of it i got "2 09 10"  Code: [Select] %Image::ExifTool::UserDefined = (  #  ......

......  think I found the solution Code: [Select] abs(Image::ExifTool::GetUnixTime($val[0] ............  return different in seconds   the final solution: Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
16
Archives / Re: Help on user defined XMP structure
« by Phil Harvey on January 23, 2011, 10:37:16 AM »

......  corresponding config file now looks like this:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ............ ',  TagTable => 'Image::ExifTool::UserDefined::AvPicasa',  },  },  }, );  %Image: ............ :ExifTool::UserDefined::AvPicasa = (  GROUPS => { 0 => 'XMP', 1 => ' ......
17
Newbies / Re: config file with composite tag
« by Phil Harvey on June 14, 2014, 11:50:12 AM »

......  when copying from another file. Try this:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
18
The "exiftool" Application / Re: Line breaks and "code replacement"
« by Phil Harvey on May 10, 2010, 05:59:10 AM »

...... . You can also replace words like this:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
19
Archives / Re: Adding separator to keywords for languages...
« by Archive on May 12, 2010, 08:54:36 AM »

...... -07]  Hi Bette,  Here is a config file for you:  Code: %Image::ExifTool::UserDefined = (  'Image:: ......
20
The Image::ExifTool API / Re: Overriding tag definitions
« by Phil Harvey on February 16, 2011, 12:09:16 PM »

......  from: perlcat on February 16, 2011, 11:39:57 AM  Code: [Select] %Image::ExifTool::UserDefined = (  ' ............  the definition for StripByteCounts in the source code for the ExifTool Exif module.  Unfortunately,  ......
21
Newbies / Re: Writing both user-defined tags and existing tags to output
« by remarkableearth on November 21, 2017, 06:21:18 PM »

......  here as namespace for confidentiality): Code: [Select] 'Image::ExifTool::XMP::Main' => {   ............ => {  TagTable => 'Image::ExifTool::UserDefined::aaa',  },  },  },  %Image:: ............ ::UserDefined::NCEI = (  GROUPS => { 0 => 'XMP', 1 =>  ............  remain blank: -tag1=- -tag2=- -tag3=-, then run Code: [Select] exiftool -csv -tag1 -tagx -tag2 -tagy - ............  the dashes (-tag1= -tag2= -tag3= ) and call Code: [Select] exiftool -csv -tag1 -tagx -tag2 -tagy - ......
22
The "exiftool" Application / Sorting photos and geotagging at the same time
« by ajiekc905 on December 05, 2016, 05:51:14 PM »

......  photos without moving them .  Here is cli:  Code: [Select] exiftool -geotag "~/Desktop/*.gpx" -ext  ............ /${Composite:GroupName;}'  Here is .exiftoolconfig Code: [Select] %Image::ExifTool::UserDefined = (  #  ......
23
Metadata / Re: Pix4d tags
« by Ethan@MAPIR on November 27, 2017, 11:55:45 PM »

......  the config file I've tried to use with no luck  Code: [Select] %Image::ExifTool::UserDefined = {     ............ => {  TagTable => 'Image::ExifTool::UserDefined::Camera',    },   ............ => {  TagTable => 'Image::ExifTool::UserDefined::GPSInfo',    },   ............ => {  TagTable => 'Image::ExifTool::UserDefined::Photo',    },  } ............ ,    },   };   %Image::ExifTool::UserDefined::Camera = {  GROUPS => { 0 => 'XMP', 1 => 'XMP- ............ , Groups => { 2 => Camera}}, };  %Image::ExifTool::UserDefined::GPSInfo = {  GROUPS => { 0 => 'EXIF', 1 => ' ............  Groups => { 2 => GPSInfo}}, };  %Image::ExifTool::UserDefined::Photo = {  GROUPS => { 0 => 'EXIF', 1 => ' ......

......  that. I use this script to reproduce the problem: Code: [Select] # Perl v5.16.3, ExifTool v9.76 and v10. ............ > 1); # I'm aware of oversizing  %Image::ExifTool::UserDefined = (  'Image::ExifTool::IPTC::ApplicationRecord' => ............  one IPTC tag then tag 2:183 is added as follows: Code: [Select] 0000000: ffd8 ffe0 0010 4a46 4946 0001  ............  IPTC tags: 0x00, 0x74, 0x6E, 0xB7, 0x78, 0x50: Code: [Select] ... 0001660: 49aa 7fff d900 ffed d060  ............  we have only the first three: 0x00, 0x74, 0x6E: Code: [Select] ... 0001660: 49aa 7fff d900 ffed 1a16  ......
25
Archives / Re: How do I create array structures in XMP?
« by Phil Harvey on January 23, 2011, 10:36:48 AM »

......  corresponding config file now looks like this:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ............ => {  TagTable => 'Image::ExifTool::UserDefined::myNS',  },  },  }, );  % ............ ::ExifTool::UserDefined::myNS = (  GROUPS => { 0 => 'XMP', 1 => 'XMP- ......
26
Newbies / Add XMP tag to each page of multipage tiff
« by tex887 on April 20, 2016, 07:30:08 PM »

......  is what my configuration file looks like.   Code: [Select]  %Image::ExifTool::UserDefined = (  ' ............ => {  TagTable => 'Image::ExifTool::UserDefined::Camera',  },  },  }, );   % ............ ::ExifTool::UserDefined::Camera = (  GROUPS => { 0 => 'XMP', 1 => 'XMP- ......
27
Newbies / Calibre custom columns in ExifTool config
« by Sue Dunham on January 09, 2016, 06:16:04 PM »

......  correctly. A sample file looks like this: Code: [Select] > exiftool.pl -xmp:all MyDoc.pdf Title  ............  latest attempt at a config file looks like this: Code: [Select] %Image::ExifTool::UserDefined = (  ' ............ => {  TagTable => 'Image::ExifTool::UserDefined::calibre',  },  },  }, );  % ............ ::ExifTool::UserDefined::calibre = (  GROUPS => { 0 => 'XMP', 1 => ' ......
28
Newbies / Re: Assign Tag Value with Specific Type/Format/Bytes
« by jeffreyke81 on July 06, 2017, 10:20:28 PM »

......  so it assigns the value in a specific format.  Code: [Select] %Image::ExifTool::UserDefined = (  ' ......
29
Newbies / Re: Set alldates from filename but ignore some numbers in the name
« by StarGeek on September 11, 2017, 03:19:03 AM »

......  instructions). Find the line %Image::ExifTool::UserDefined::Shortcuts = ( and add this line right after it.  ............ .*/$1/} 00:00:00+05:00" FileOrDir  Example output: Code: [Select] C:\>exiftool -g1 -a -s -myalldates "Y:\ ......
30
The "exiftool" Application / Re: set all to oldest known date
« by Phil Harvey on January 13, 2017, 07:16:46 AM »

......  that ignoring 1970 dates is what Andreas wanted:  Code: [Select] %Image::ExifTool::UserDefined = (  ' ............  for using OldestDateTime with the -d option:  Code: [Select]  PrintConv => '$self-> ......
Pages: [1]